How does it work? Watch and find out!
Install Instructions
1. Use the below .mis file to start the Centralis Health Gateway install process
MSI: https://secure.fl.hienetworks.com/CentralisHealthGatewayInstaller.msi
2. Downloads and opens installer then click Next
3. You will then click Yes on the next screen
4. Select Close as install is now complete
5. Launch the Centralis Health Gateway from the start menu
6. Then click Yes on next screen
7. Obtain the Gateway Name and Key from your Centralis Health point of contact, then click Authenticate
8. Provide the IP Address for the message below to Centralis Health. After saving, you will click Ok and then Authenticate again and they should not receive the below message again.
9. Enter the below required information based on the use case that fits their needs
10. Client will click with Start service was all folders and configurations have been tested
11. Click OK on the next screen register and start service
12. Press any key to continue
13. The Service should now be running
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article